However those phenomena do not mean malfunction or out of order with LCD, which will come back in the specified operating temperature range.
If the display area is pushed hard during operation. Some font will be abnormally displayed but it resumes normal condition once turning off .
A slight dew depositing on terminals may cause Electro-chemical reaction resulting in terminal open circuit. Under the maximum operating temperature, 50%RH or less is required
1-6 STORAGE
In the case of storing for a long period of time (for instance, for years) for the purpose of replacement use， the following ways are recommended
-Storage in a anti-static polyethylene bag with the opening sealed so as not to enter fresh air outside in it, and with no desiccant.
-Placing in a dark place where neither exposure to direct sunlight nor to light, keeping temperature in the specified storage temperature range.
-Storing with no touch on polarizers surface by anything else. (it is recommended to store them as they have been contained in the inner container ).
1-7.SAFETY
It is recommended to crash damaged or unnecessary LCD into pieces and wash off liquid crystal by using solvents such as acetone and ethanol, which should be burned up later.
When any liquid crystal leaked out of a damaged glass cell comes in contact with your hands, please wash it off immediately with soap and water.
2.PRECAUTION FOR USE
2-1. A limit sample should be provided by the both parties on the occasion when the both parties agree its necessity.
Judgment by a limit sample shall take effect after the limit sample has been established and confirmed by the both parties.
2-2. On the following occasions, the handling of problem should be decided through discussion and agreement between representative of the both parties
When a question is arisen in this specification.
When a new problem is arisen which is not specified in this specifications.
When an inspection specification change or operating condition change in customer is reported to Hebei Jiya Electronics Co., LTD and some problem is arisen in this specification due to the change.
When a new problem is arisen at the customer's operating set for sample evaluation in the customer size. Page Up |
Your current location:jiyalcd>Products >Knowledge
